| Assessment Year | 2000 |
|---|---|
| Principal Product | Plastic Moldings |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 32 |
| Plant Area |
27,000
ft2
|
| Annual Production | 2,400,000
lb
|
| Production Hrs. Annual | 7,488
hrs
|
| Location (State) | Oklahoma |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $100,342 | 1,244,725 |
kWh
|
$0.081 |
| Electricity Demand | $31,289 | 5,006 |
kW-mo/yr
|
$6.25 |
| Electricity Fees | $7,602 | - |
|
- |
| Natural Gas | $939 | 123 |
MMBtu
|
$7.63 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $245,967 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | Personnel Changes Savings | Primary Raw Material Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $590 | $2,931 |
$606
7,620
kWh
|
$75
-
kW-mo/yr
|
- | - | - | $(-91.0) | |
| 02 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $62,354 | $10,000 |
$62,354
761,430
kWh
|
- | - | - | - | - | |
| 03 | 2.2511: Insulate bare equipment | $6,959 | $6,951 |
$6,959
85,873
kWh
|
- | - | - | - | - | |
| 04 | 4.211: Consider use / purchase of bulk materials where possible | $62,772 | $17,378 | - | - | - | - | $62,772 | - | |
| 05 | 4.445: Install equipment to move product | $112,320 | $19,390 | - | - | - | $112,320 | - | - | |
| 06 | 3.5217: Reuse / recycle/ sell paper products | $972 | - | - | - |
$972
-
lb
|
- | - | - | |
| TOTAL RECOMMENDED | $245,967 | $56,650 |
$69,919
854,923
kWh
|
$75
-
kW-mo/yr
|
$972
-
lb
|
$112,320 | $62,772 | $(-91.0) | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | Personnel Changes Savings | Primary Raw Material Savings | Ancillary Material Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs