| Assessment Year | 1995 |
|---|---|
| Principal Product | Poultry Products |
| NAICS |
n/a
|
| SIC | 2015: Poultry Slaughtering and Processing |
| Sales Range | $100 M to 500M |
| # of Employees | 980 |
| Plant Area |
330,000
ft2
|
| Annual Production | 280,000,000
lb
|
| Production Hrs. Annual | 4,250
hrs
|
| Location (State) | Delaware |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $1,553,593 | 27,904,162 |
kWh
|
$0.056 |
| LPG | $44,322 | 9,395 |
MMBtu
|
$4.72 |
| Fuel Oil #2 | $209,296 | 85,347 |
MMBtu
|
$2.45 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $137,863 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #2 Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $38,274 | $45,837 |
$38,274
687,866
kWh
|
- | |
| 02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $5,159 | $2,803 |
$5,159
92,614
kWh
|
- | |
| 03 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $26,349 | $66,206 |
$26,349
473,329
kWh
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $18,336 | $48,924 |
$18,336
329,719
kWh
|
- | |
| 05 | 2.7135: Install occupancy sensors | $5,440 | $1,793 |
$5,440
97,890
kWh
|
- | |
| 06 | 2.2437: Recover waste heat from equipment | $12,618 | $26,618 | - |
$12,618
-
MMBtu
|
|
| 07 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,309 | $1,000 |
$2,309
41,325
kWh
|
- | |
| 08 | 2.2626: Avoid frost formation on evaporators | $29,378 | $33,000 |
$29,378
527,843
kWh
|
- | |
| TOTAL RECOMMENDED | $137,863 | $226,181 |
$125,245
2,250,586
kWh
|
$12,618
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #2 Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs