Assessment Year | 1995 |
---|---|
Principal Product | Ammoniated fertilizers, pelleted lime & gypsum |
NAICS |
n/a
|
SIC | 2875: Fertilizers, Mixing Only |
Sales Range | $5 M to 10M |
# of Employees | 32 |
Plant Area |
100,000
ft2
|
Annual Production | 95,000
pieces
|
Production Hrs. Annual | 2,944
hrs
|
Location (State) | Virginia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $113,847 | 1,293,963 |
kWh
|
$0.088 |
Natural Gas | $50,658 | 23,378 |
MMBtu
|
$2.17 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $23,006 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $8,623 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.1233: Analyze flue gas for proper air/fuel ratio | $1,980 | $200 | - |
$1,980
-
MMBtu
|
- | |
02 | 2.1233: Analyze flue gas for proper air/fuel ratio | $242 | $200 | - |
$242
-
MMBtu
|
- | |
03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $980 | $800 |
$980
11,137
kWh
|
- | - | |
04 | 2.8112: Combine utility meters | $4,530 | $7,960 | - | - | $4,530 | |
05 | 2.2136: Install / repair insulation on steam lines | $209 | $102 | - |
$209
-
MMBtu
|
- | |
06 | 2.4133: Use most efficient type of electric motors | $3,264 | $8,257 |
$3,264
36,928
kWh
|
- | - | |
07 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $2,157 | $2,182 |
$2,157
24,619
kWh
|
- | - | |
08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $9,644 | $17,182 |
$9,644
109,613
kWh
|
- | - | |
TOTAL RECOMMENDED | $23,006 | $36,883 |
$16,045
182,297
kWh
|
$2,431
-
MMBtu
|
$4,530 | ||
TOTAL IMPLEMENTED | $8,623 | $11,639 |
$6,401
72,684
kWh
|
$2,222
-
MMBtu
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs