| Assessment Year | 1996 |
|---|---|
| Principal Product | Roofing Systems |
| NAICS |
n/a
|
| SIC | 2822: Synthetic Rubber (Vulcanizable Elastomers) |
| Sales Range | $5 M to 10M |
| # of Employees | 35 |
| Plant Area |
640,000
ft2
|
| Annual Production | 858,000
units
|
| Production Hrs. Annual | 6,864
hrs
|
| Location (State) | Nevada |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $58,699 | 1,359,906 |
kWh
|
$0.043 |
| Electricity Demand | $36,025 | 3,882 |
kW-mo/yr
|
$9.28 |
| Electricity Fees | $600 | - |
|
- |
| Natural Gas | $104,530 | 19,642 |
MMBtu
|
$5.32 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $55,663 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $54,671 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Other Liquid (haz) Savings | Solid Waste (haz) Savings | Personnel Changes Savings |
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,596 | $200 |
$1,596
36,928
kWh
|
- | - | - | - | - | |
| 02 | 2.2449: Recover heat from exhausted steam, hot air or hot water | $404 | $900 | - | - |
$404
-
MMBtu
|
- | - | - | |
| 03 | 2.7111: Reduce illumination to minimum necessary levels | $5,184 | $90 |
$5,184
86,753
kWh
|
- | - | - | - | - | |
| 04 | 2.7135: Install occupancy sensors | $100 | $57 |
$80
1,758
kWh
|
$20
-
kW-mo/yr
|
- | - | - | - | |
| 05 | 2.5195: Change product design to reduce energy requirements | $228 | $180 | - | - |
$228
-
MMBtu
|
- | - | - | |
| 06 | 2.2511: Insulate bare equipment | $2,375 | $1,452 | - | - |
$2,375
-
MMBtu
|
- | - | - | |
| 07 | 2.7243: Improve air circulation with destratification fans / other methods | $2,535 | $5,200 | - | - |
$2,535
-
MMBtu
|
- | - | - | |
| 08 | 2.2515: Use optimum thickness insulation | $9,970 | $2,000 | - | - |
$9,970
-
MMBtu
|
- | - | - | |
| 09 | 2.2515: Use optimum thickness insulation | $4,848 | $6,210 | - | - |
$4,848
-
MMBtu
|
- | - | - | |
| 10 | 3.7222: Minimize overflows by installing level controls | $360 | $600 | - | - | - | - |
$200
-
lb
|
$160 | |
| 11 | 3.7211: Modify material application methods | $28,063 | $2,040 | - | - | - |
$88
-
gal
|
- | $27,975 | |
| TOTAL RECOMMENDED | $55,663 | $18,929 |
$6,860
125,439
kWh
|
$20
-
kW-mo/yr
|
$20,360
-
MMBtu
|
$88
-
gal
|
$200
-
lb
|
$28,135 | ||
| TOTAL IMPLEMENTED | $54,671 | $17,249 |
$6,860
125,439
kWh
|
$20
-
kW-mo/yr
|
$19,728
-
MMBtu
|
$88
-
gal
|
- | $27,975 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Other Liquid (haz) Savings | Solid Waste (haz) Savings | Personnel Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs