| Assessment Year | 1991 |
|---|---|
| Principal Product | PLASTIC MOULDINGS |
| NAICS |
n/a
|
| SIC | 3714: Motor Vehicle Parts and Accessories |
| Sales Range | less than $500 k |
| # of Employees | 44 |
| Plant Area |
n/a
|
| Annual Production | 600
pieces
|
| Production Hrs. Annual | 2,145
hrs
|
| Location (State) | Indiana |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $28,022 | 352,872 |
kWh
|
$0.079 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $8,451 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7492: Use proper thickness of insulation on building envelope | $5,825 | $8,880 | - |
$5,825
-
MMBtu
|
- | |
| 02 | 2.8121: Apply for tax-free status for energy purchases | $1,800 | $250 |
$1,400
-
kWh
|
$400
-
MMBtu
|
- | |
| 03 | 2.7492: Use proper thickness of insulation on building envelope | $600 | $1,930 | - |
$600
-
MMBtu
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $81 | - |
$186
2,345
kWh
|
- | $(-105.0) | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $145 | $200 |
$145
1,758
kWh
|
- | - | |
| TOTAL RECOMMENDED | $8,451 | $11,260 |
$1,731
4,103
kWh
|
$6,825
-
MMBtu
|
$(-105.0) | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs