Assessment Year | 2005 |
---|---|
Principal Product | Processed cotton fiber |
NAICS | 322121: Paper (except Newsprint) Mills |
SIC | 2399: Fabricated Textile Products, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 28 |
Plant Area |
350,000
ft2
|
Annual Production | 16,250,000
lb
|
Production Hrs. Annual | 7,800
hrs
|
Location (State) | North Carolina |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $247,243 | 7,119,907 |
kWh
|
$0.035 |
Electricity Demand | $103,686 | 12,477 |
kW-mo/yr
|
$8.31 |
Natural Gas | $621,600 | 72,542 |
MMBtu
|
$8.57 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $155,992 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $12,069 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Ancillary Material Cost Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.1133: Adjust burners for efficient operation | $8,068 | $6,225 | - | - |
$8,068
-
MMBtu
|
- | |
02 | 2.1331: Burn a less expensive grade of fuel | $113,412 | $10,000 | - | - |
$550,680
-
MMBtu
|
$(-437,268.0) | |
03 | 2.2437: Recover waste heat from equipment | $11,962 | $7,002 | - | - |
$11,962
-
MMBtu
|
- | |
04 | 2.2136: Install / repair insulation on steam lines | $10,481 | $3,035 | - | - |
$10,481
-
MMBtu
|
- | |
05 | 2.7124: Make a practice of turning off lights when not needed | $11,954 | $480 |
$8,738
250,380
kWh
|
$3,216
-
kW-mo/yr
|
- | - | |
06 | 2.7134: Use photocell controls | $115 | $165 |
$61
1,755
kWh
|
$54
-
kW-mo/yr
|
- | - | |
TOTAL RECOMMENDED | $155,992 | $26,907 |
$8,799
252,135
kWh
|
$3,270
-
kW-mo/yr
|
$581,191
-
MMBtu
|
$(-437,268.0) | ||
TOTAL IMPLEMENTED | $12,069 | $645 |
$8,799
252,135
kWh
|
$3,270
-
kW-mo/yr
|
- | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Ancillary Material Cost Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs