| Assessment Year | 1995 |
|---|---|
| Principal Product | Blow Molded Plastic |
| NAICS |
n/a
|
| SIC | 3082: Unsupported Plastics Profile Shapes |
| Sales Range | $10 M to 50M |
| # of Employees | 300 |
| Plant Area |
84,200
ft2
|
| Annual Production | 1,800,000
pieces
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | North Carolina |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $729,310 | 14,062,720 |
kWh
|
$0.052 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $111,493 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $4,700 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.7232: Replace existing hvac unit with high efficiency model | $87,425 | $160,000 |
$87,425
835,580
kWh
|
|
| 02 | 2.7491: Insulate glazing, walls, ceilings, and roofs | $16,833 | $84,000 |
$16,833
135,111
kWh
|
|
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $416 | $120 |
$416
8,206
kWh
|
|
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,535 | $1,320 |
$2,535
47,186
kWh
|
|
| 05 | 2.3137: Use power during off-peak periods | $4,284 | - |
$4,284
-
kWh
|
|
| TOTAL RECOMMENDED | $111,493 | $245,440 |
$111,493
1,026,083
kWh
|
||
| TOTAL IMPLEMENTED | $4,700 | $120 |
$4,700
8,206
kWh
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs