| Assessment Year | 2025 |
|---|---|
| Principal Product | galvanizing metal parts |
| NAICS | 332812: Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers |
| SIC | 3479: Coating, Engraving, and Allied Services, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 25 |
| Plant Area |
18,000
ft2
|
| Annual Production | 19,407,344
lb
|
| Production Hrs. Annual | 2,520
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $30,775 | 269,371 |
kWh
|
$0.11 | |
| Electricity Demand | $2,945 | 450 |
kW-mo/yr
|
$6.54 | |
| Natural Gas | $96,731 | 21,138 |
MMBtu
|
$4.58 | |
| Waste Disposal Costs | |||||
| Water Usage | $3,148 | 321 |
Tgal
|
$9.81 | |
| Water Disposal | $5,642 | 321 |
Tgal
|
$17.58 | |
| TOTAL YEARLY COSTS | $139,241 | ||||
| RECOMMENDED SAVINGS* | $524,024 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | - | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $1,938 | $3,300 |
$1,938
17,002
kWh
|
- | - | |
| 02 | 2.2122: Install / repair insulation on condensate lines | $1,500 | $5,174 | - |
$1,500
-
MMBtu
|
- | |
| 03 | 2.7135: Install occupancy sensors | $84 | $245 |
$84
732
kWh
|
- | - | |
| 04 | 2.2314: Replace heat treating oven with more efficient unit | $518,165 | $870,000 | - |
$5,899
-
MMBtu
|
$512,266 | |
| 05 | 2.2442: Preheat combustion air with waste heat | $2,337 | $6,500 | - |
$2,337
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $524,024 | $885,219 |
$2,022
17,734
kWh
|
$9,736
-
MMBtu
|
$512,266 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs