| Assessment Year | 2005 |
|---|---|
| Principal Product | Lumber |
| NAICS | 321113: Sawmills |
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $5 M to 10M |
| # of Employees | 49 |
| Plant Area |
50,000
ft2
|
| Annual Production | 12,000
thousand feet
|
| Production Hrs. Annual | 2,025
hrs
|
| Location (State) | Alabama |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $69,118 | 1,470,600 |
kWh
|
$0.047 |
| Electricity Demand | $35,655 | 9,125 |
kW-mo/yr
|
$3.91 |
| Electricity Fees | $35,219 | - |
|
- |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $12,916 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $12,916 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7132: Install timers on light switches in little used areas | $7,283 | $7,047 |
$4,156
88,433
kWh
|
$1,106
-
kW-mo/yr
|
$2,021 | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,876 | $2,774 |
$1,055
22,448
kWh
|
$307
-
kW-mo/yr
|
$514 | |
| 03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,794 | $3,027 |
$926
19,693
kWh
|
$409
-
kW-mo/yr
|
$459 | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $972 | $243 |
$661
14,073
kWh
|
- | $311 | |
| 05 | 2.2437: Recover waste heat from equipment | $574 | $1,139 |
$315
6,701
kWh
|
$104
-
kW-mo/yr
|
$155 | |
| 06 | 2.7124: Make a practice of turning off lights when not needed | $417 | - |
$284
6,044
kWh
|
- | $133 | |
| TOTAL RECOMMENDED | $12,916 | $14,230 |
$7,397
157,392
kWh
|
$1,926
-
kW-mo/yr
|
$3,593 | ||
| TOTAL IMPLEMENTED | $12,916 | $14,230 |
$7,397
157,392
kWh
|
$1,926
-
kW-mo/yr
|
$3,593 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs