| Assessment Year | 1996 |
|---|---|
| Principal Product | Ductile Iron Castings |
| NAICS |
n/a
|
| SIC | 3321: Gray and Ductile Iron Foundries |
| Sales Range | $1 M to 5M |
| # of Employees | 69 |
| Plant Area |
36,000
ft2
|
| Annual Production | 4,507,114
lb
|
| Production Hrs. Annual | 4,000
hrs
|
| Location (State) | Alabama |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $210,070 | 5,330,305 |
kWh
|
$0.039 |
| Electricity Fees | $72,698 | - |
|
- |
| Natural Gas | $54,850 | 10,257 |
MMBtu
|
$5.35 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $100,925 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Fees Savings | Natural Gas Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4314: Use synthetic lubricant | $1,743 | $300 |
$1,284
30,188
kWh
|
$459 | - | - | |
| 02 | 2.2437: Recover waste heat from equipment | $2,677 | $2,740 | - | - |
$2,677
-
MMBtu
|
- | |
| 03 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $4,360 | $7,226 |
$3,196
85,873
kWh
|
$1,164 | - | - | |
| 04 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,012 | $925 |
$767
18,171
kWh
|
$245 | - | - | |
| 05 | 2.3137: Use power during off-peak periods | $81,053 | - | - | $81,053 | - | - | |
| 06 | 4.431: Train operators for maximum operating efficiency | $10,080 | $640 | - | - | - | $10,080 | |
| TOTAL RECOMMENDED | $100,925 | $11,831 |
$5,247
134,232
kWh
|
$82,921 |
$2,677
-
MMBtu
|
$10,080 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Fees Savings | Natural Gas Savings | Primary Product Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs