| Assessment Year | 1999 |
|---|---|
| Principal Product | Plastic Injection Molded Hospital Supplies |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 390 |
| Plant Area |
165,800
ft2
|
| Annual Production | 392,000
units
|
| Production Hrs. Annual | 6,120
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $307,950 | 7,158,851 |
kWh
|
$0.043 |
| Electricity Demand | $24,858 | 1,431 |
kW-mo/yr
|
$17.37 |
| Electricity Fees | $40,897 | - |
|
- |
| Natural Gas | $55,012 | 18,386 |
MMBtu
|
$2.99 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $267,651 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $315 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | Personnel Changes Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $8,133 | $14,908 |
$7,640
156,800
kWh
|
$493
-
kW-mo/yr
|
- | - | |
| 02 | 2.4231: Reduce the pressure of compressed air to the minimum required | $721 | $40 |
$681
14,068
kWh
|
$40
-
kW-mo/yr
|
- | - | |
| 03 | 3.5212: Regrind, reuse, or sell scrap plastic parts | $192,000 | - | - | - |
$192,000
-
lb
|
- | |
| 04 | 3.5313: Increase amount of waste recovered for resale | $315 | - | - | - |
$315
-
lb
|
- | |
| 05 | 4.425: Eliminate/reduce redundant inspections | $66,482 | $156,000 | - | - | - | $66,482 | |
| TOTAL RECOMMENDED | $267,651 | $170,948 |
$8,321
170,868
kWh
|
$533
-
kW-mo/yr
|
$192,315
-
lb
|
$66,482 | ||
| TOTAL IMPLEMENTED | $315 | - | - | - |
$315
-
lb
|
- | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs