| Assessment Year | 2025 |
|---|---|
| Principal Product | Construction Reinforcing Mesh and Wire |
| NAICS | 332618: Other Fabricated Wire Product Manufacturing |
| SIC | 3496: Miscellaneous Fabricated Wire Products |
| Sales Range | $10 M to 50M |
| # of Employees | 60 |
| Plant Area |
79,266
ft2
|
| Annual Production | 9,000
ton
|
| Production Hrs. Annual | 2,000
hrs
|
| Location (State) | Puerto Rico |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $188,291 | 831,731 |
kWh
|
$0.23 |
| Electricity Demand | $56,838 | 6,138 |
kW-mo/yr
|
$9.26 |
| Electricity Fees | $5,385 | - |
|
- |
| TOTAL YEARLY COSTS | $250,514 | |||
| RECOMMENDED SAVINGS* | $83,467 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.8114: Change rate schedules or other changes in utility service | $1,368 | $100 | - | - | $1,368 | |
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $10,332 | $1,020 |
$7,610
33,673
kWh
|
$2,722
-
kW-mo/yr
|
- | |
| 03 | 2.9114: Use solar heat to make electricty | $58,107 | $6,400 | - | - | $58,107 | |
| 04 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $4,309 | $4,560 |
$4,071
18,013
kWh
|
$238
-
kW-mo/yr
|
- | |
| 05 | 2.3212: Optimize plant power factor | $8,024 | $18,830 | - |
$8,024
-
kW-mo/yr
|
- | |
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,327 | $3,414 |
$1,131
5,005
kWh
|
$196
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $83,467 | $34,324 |
$12,812
56,691
kWh
|
$11,180
-
kW-mo/yr
|
$59,475 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs