| Assessment Year | 2009 |
|---|---|
| Principal Product | beer |
| NAICS | 424810: Beer and Ale Merchant Wholesalers |
| SIC | 5181: Beer and Ale |
| Sales Range | $10 M to 50M |
| # of Employees | 395 |
| Plant Area |
250,000
ft2
|
| Annual Production | 100,000
Tgal
|
| Production Hrs. Annual | 6,732
hrs
|
| Location (State) | Puerto Rico |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $2,186,269 | 11,702,400 |
kWh
|
$0.19 |
| Electricity Demand | $269,848 | 32,936 |
kW-mo/yr
|
$8.19 |
| Electricity Fees | $8,830 | - |
|
- |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $279,483 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $156,383 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Fuel Oil #6 Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.2414: Use waste heat from hot flue gases to preheat | $123,100 | $64,000 | - | - |
$123,100
-
MMBtu
|
|
| 02 | 2.1233: Analyze flue gas for proper air/fuel ratio | $83,014 | $1,500 | - | - |
$83,014
-
MMBtu
|
|
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $37,375 | $60 |
$30,572
436,736
kWh
|
$6,803
-
kW-mo/yr
|
- | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $18,482 | $920 |
$18,182
265,042
kWh
|
$300
-
kW-mo/yr
|
- | |
| 05 | 2.2113: Repair or replace steam traps | $12,330 | $800 | - | - |
$12,330
-
MMBtu
|
|
| 06 | 2.7496: Install partitions to reduce size of conditioned space | $5,182 | $640 |
$4,813
25,332
kWh
|
$369
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $279,483 | $67,920 |
$53,567
727,110
kWh
|
$7,472
-
kW-mo/yr
|
$218,444
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $156,383 | $3,920 |
$53,567
727,110
kWh
|
$7,472
-
kW-mo/yr
|
$95,344
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Fuel Oil #6 Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs