| Assessment Year | 2002 |
|---|---|
| Principal Product | Aluminum estrusion |
| NAICS |
n/a
|
| SIC | 3354: Aluminum Extruded Products |
| Sales Range | $10 M to 50M |
| # of Employees | 27 |
| Plant Area |
42,868
ft2
|
| Annual Production | 8,000,000
pieces
|
| Production Hrs. Annual | 4,462
hrs
|
| Location (State) | Florida |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $213,470 | 2,481,818 |
kWh
|
$0.086 |
| Electricity Demand | $49,939 | 18,264 |
kW-mo/yr
|
$2.73 |
| Natural Gas | $115,418 | 44,392 |
MMBtu
|
$2.60 |
| LPG | $7,043 | 445 |
MMBtu
|
$15.83 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $230,330 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $4,230 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Water Disposal Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 3.2123: Convert to high volume low pressure (hvlp) paint guns | $213,180 | $138,361 | - | - | - | $213,180 | |
| 02 | 2.4112: Install soft-start to eliminate nuisance trips | $7,472 | $8,890 | - |
$7,472
-
kW-mo/yr
|
- | - | |
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $4,230 | $117 |
$4,230
49,186
kWh
|
- | - | - | |
| 04 | 3.4155: Meter waste water | $3,632 | $15 | - | - |
$3,632
-
Tgal
|
- | |
| 05 | 2.1135: Repair furnaces and oven doors so that they seal efficiently | $1,816 | $60 |
$1,816
181,626
kWh
|
- | - | - | |
| TOTAL RECOMMENDED | $230,330 | $147,443 |
$6,046
230,812
kWh
|
$7,472
-
kW-mo/yr
|
$3,632
-
Tgal
|
$213,180 | ||
| TOTAL IMPLEMENTED | $4,230 | $117 |
$4,230
49,186
kWh
|
- | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs