Assessment Year | 2001 |
---|---|
Principal Product | Construction castings |
NAICS |
n/a
|
SIC | 3321: Gray and Ductile Iron Foundries |
Sales Range | $10 M to 50M |
# of Employees | 250 |
Plant Area |
264,915
ft2
|
Annual Production | 0
units
|
Production Hrs. Annual | 4,992
hrs
|
Location (State) | Florida |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $585,112 | 10,835,415 |
kWh
|
$0.054 |
Electricity Demand | $191,456 | 23,578 |
kW-mo/yr
|
$8.12 |
Natural Gas | $242,840 | 28,425 |
MMBtu
|
$8.54 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $211,646 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $77,381 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Water Disposal Savings | Administrative Changes Savings | Water Consumption Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|---|
01 | 4.431: Train operators for maximum operating efficiency | $7,181 | $3,300 | - | - | - | - | $7,181 | |
02 | 2.1133: Adjust burners for efficient operation | $70,200 | $187 |
$70,200
2,340,000
kWh
|
- | - | - | - | |
03 | 3.4155: Meter waste water | $8,529 | $3,650 | - |
$8,529
-
Tgal
|
- | - | - | |
04 | 2.1333: Convert combustion equipment to burn oil | $21,440 | $10,399 |
$21,440
731,231
kWh
|
- | - | - | - | |
05 | 3.4151: Minimize water usage | $6,397 | $1,899 | - | - | - |
$6,397
-
Tgal
|
- | |
06 | 2.3415: Use a fossil fuel engine to cogenerate electricity or motive power; and utilize heat | $97,899 | $585,000 | - | - | $97,899 | - | - | |
TOTAL RECOMMENDED | $211,646 | $604,435 |
$91,640
3,071,231
kWh
|
$8,529
-
Tgal
|
$97,899 |
$6,397
-
Tgal
|
$7,181 | ||
TOTAL IMPLEMENTED | $77,381 | $3,487 |
$70,200
2,340,000
kWh
|
- | - | - | $7,181 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Water Disposal Savings | Administrative Changes Savings | Water Consumption Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs