| Assessment Year | 1993 |
|---|---|
| Principal Product | Cellulose board products |
| NAICS |
n/a
|
| SIC | 3111: Leather Tanning and Finishing |
| Sales Range | $50 M to 100M |
| # of Employees | 101 |
| Plant Area |
153,065
ft2
|
| Annual Production | 15,000
ton
|
| Production Hrs. Annual | 8,232
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $621,144 | 5,533,118 |
kWh
|
$0.11 |
| Fuel Oil #6 | $464,582 | 154,071 |
MMBtu
|
$3.02 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $71,095 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $16,542 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #6 Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $6,922 | $21,677 |
$6,922
61,254
kWh
|
- | |
| 02 | 2.4239: Eliminate or reduce compressed air usage | $30,415 | $2,000 |
$30,415
269,637
kWh
|
- | |
| 03 | 2.2414: Use waste heat from hot flue gases to preheat | $7,598 | $5,025 | - |
$7,598
-
MMBtu
|
|
| 04 | 2.6218: Turn off equipment when not in use | $5,885 | $100 |
$5,885
52,169
kWh
|
- | |
| 05 | 2.1233: Analyze flue gas for proper air/fuel ratio | $10,655 | $15,800 | - |
$10,655
-
MMBtu
|
|
| 06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $9,620 | - |
$9,620
85,287
kWh
|
- | |
| TOTAL RECOMMENDED | $71,095 | $44,602 |
$52,842
468,347
kWh
|
$18,253
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $16,542 | $21,677 |
$16,542
146,541
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #6 Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs