| Assessment Year | 2024 |
|---|---|
| Principal Product | automotive machine parts, toolboxes, carts/conveyors |
| NAICS | 332999: All Other Miscellaneous Fabricated Metal Product Manufacturing |
| SIC | 3599: Industrial and Commercial Machinery and Equipment, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 91 |
| Plant Area |
85,900
ft2
|
| Annual Production | 1,158
units
|
| Production Hrs. Annual | 7,592
hrs
|
| Location (State) | Arkansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $167,220 | 2,235,643 |
kWh
|
$0.075 | |
| Electricity Demand | $73,032 | 8,290 |
kW-mo/yr
|
$8.81 | |
| Waste Disposal Costs | |||||
| Water Usage | $3,513 | 370 |
Tgal
|
$9.49 | |
| Water Disposal | $3,513 | 370 |
Tgal
|
$9.49 | |
| Solid Waste (non-haz) | $16,015 | 209,940 |
lb
|
$0.076 | |
| TOTAL YEARLY COSTS | $263,293 | ||||
| RECOMMENDED SAVINGS* | $54,466 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | - | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Personnel Changes Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $3,456 | $925 |
$3,456
51,075
kWh
|
- | - | - | |
| 02 | 2.6218: Turn off equipment when not in use | $501 | $1,131 |
$449
6,208
kWh
|
$75
-
kW-mo/yr
|
- | $(-23.0) | |
| 03 | 3.6193: Install equipment (eg compactor) to reduce disposal costs | $34,661 | $16,400 |
$(-10.1)
(-80)
kWh
|
- | $(-2,600.0) | $37,271 | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $15,848 | $8,360 |
$(-7,694.1)
(-75,502)
kWh
|
$(-1,657.7)
-
kW-mo/yr
|
- | $25,200 | |
| TOTAL RECOMMENDED | $54,466 | $26,816 |
$(-3,799.5)
(-18,299)
kWh
|
$(-1,582.8)
-
kW-mo/yr
|
$(-2,600.0) | $62,448 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs