Assessment Year | 2003 |
---|---|
Principal Product | Thick Film Paste, Solder Paste |
NAICS | 331492: Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum) |
SIC | 3399: Primary Metal Products, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 95 |
Plant Area |
62,500
ft2
|
Annual Production | 100
ton
|
Production Hrs. Annual | 4,000
hrs
|
Location (State) | Pennsylvania |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $203,222 | 3,382,100 |
kWh
|
$0.060 |
Electricity Demand | $94,520 | 7,857 |
kW-mo/yr
|
$12.03 |
Natural Gas | $55,542 | 6,811 |
MMBtu
|
$8.15 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $134,657 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | - |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|---|
01 | 4.651: Install back-up equipment | $125,000 | $30,500 | - | - | - | $125,000 | |
02 | 2.6218: Turn off equipment when not in use | $4,881 | - |
$3,366
56,000
kWh
|
$1,515
-
kW-mo/yr
|
- | - | |
03 | 2.7135: Install occupancy sensors | $636 | $825 |
$636
10,582
kWh
|
- | - | - | |
04 | 2.2414: Use waste heat from hot flue gases to preheat | $1,858 | $6,500 | - | - |
$1,858
-
MMBtu
|
- | |
05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,513 | - |
$946
15,736
kWh
|
$567
-
kW-mo/yr
|
- | - | |
06 | 2.7132: Install timers on light switches in little used areas | $769 | $200 |
$769
12,800
kWh
|
- | - | - | |
TOTAL RECOMMENDED | $134,657 | $38,025 |
$5,717
95,118
kWh
|
$2,082
-
kW-mo/yr
|
$1,858
-
MMBtu
|
$125,000 | ||
TOTAL IMPLEMENTED | - | - | - | - | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs