ITAC Assessment: LE0122
ITAC logo
ITAC Assessment: LE0122
Grant Funding Opportunity NOW OPEN
Up to $300k at 50% cost share for qualifying* projects.
Grant Funding Opportunity Open
Qualifying* small and medium-sized US manufacturers, that received an ITAC, Onsite Energy/CHP TAP, or qualified equivalent assessment since 2018 can now apply for grants for implementation of assessment recommendations at up to 50% of qualifying* project costs with a maximum of $300,000 per grant.
IMPORTANT: The grant program now operates on a rolling basis and applications may be submitted at any time through the year, with quarterly reviews.
*See Full Grant Solicitation for full qualification and selection details.
Assessment Year 2001
Principal Product Stainless Steel Rods, Bars
NAICS
n/a
SIC 3316: Cold-Rolled Steel Sheet, Strip, and Bars
Sales Range $10
M
to 50
M
# of Employees 240
Plant Area 100,000
ft2
Annual Production 63,319
lb
Production Hrs. Annual 8,520
hrs
Location (State) Pennsylvania

Facility Energy Cost and Usage

Source Yearly Cost Usage
Electricity Usage $398,235 6,351,300
kWh
Electricity Demand $77,807 13,054
kW-mo/yr
Natural Gas $73,032 6,116
MMBtu
TOTAL YEARLY COSTS -
RECOMMENDED SAVINGS* $51,331 *Non-energy impacts included in savings.
IMPLEMENTED SAVINGS* -

Recommendations

# Description Yearly Savings* Imp'd Cost* Status Electricity Usage Savings Electricity Demand Savings Natural Gas Savings
01 2.4312: Improve lubrication practices $2,814 $2,450 $2,454
48,594
kWh
$360
-
kW-mo/yr
-
02 2.3131: Reschedule plant operations or reduce load to avoid peaks $11,672 $2,500 - $11,672
-
kW-mo/yr
-
03 2.1331: Burn a less expensive grade of fuel $26,023 $54,800 - - $26,023
-
MMBtu
04 2.6211: Conserve energy by efficient use of vending machines $6,091 - $6,091
120,613
kWh
- -
05 2.4133: Use most efficient type of electric motors $4,731 $19,320 $4,093
81,047
kWh
$638
-
kW-mo/yr
-
TOTAL RECOMMENDED $51,331 $79,070 $12,638
250,254
kWh
$12,670
-
kW-mo/yr
$26,023
-
MMBtu
TOTAL IMPLEMENTED - - - - -
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs