| Assessment Year | 1990 |
|---|---|
| Principal Product | STEEL CASTINGS |
| NAICS |
n/a
|
| SIC | 3325: Steel Foundries, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 165 |
| Plant Area |
n/a
|
| Annual Production | 6,200
ton
|
| Production Hrs. Annual | 4,000
hrs
|
| Location (State) | Nebraska |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $783,072 | 13,985,053 |
kWh
|
$0.056 |
| Natural Gas | $202,000 | 57,265 |
MMBtu
|
$3.53 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $171,223 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $104,866 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.8113: Purchase gas directly from a contract gas supplier | $39,803 | - | - |
$39,803
-
MMBtu
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,872 | $1,000 |
$2,265
40,445
kWh
|
- | $607 | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $713 | $741 |
$509
9,086
kWh
|
- | $204 | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $74 | $90 |
$74
1,172
kWh
|
- | - | |
| 05 | 3.4115: Recover and reuse cooling water | $65,074 | $27,000 | - | - | $65,074 | |
| 06 | 2.6221: Use most efficient equipment at it's maximum capacity and less efficient equipment only when necessary | $61,404 | - | - |
$61,404
-
MMBtu
|
- | |
| 07 | 2.2422: Use waste heat from hot flue gases to generate steam | $1,283 | $3,200 | - |
$1,283
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $171,223 | $32,031 |
$2,848
50,703
kWh
|
$102,490
-
MMBtu
|
$65,885 | ||
| TOTAL IMPLEMENTED | $104,866 | $1,831 |
$2,848
50,703
kWh
|
$101,207
-
MMBtu
|
$811 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs