| Assessment Year | 2019 |
|---|---|
| Principal Product | Pipe Coatings |
| NAICS | 332812: Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers |
| SIC | 3479: Coating, Engraving, and Allied Services, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 100 |
| Plant Area |
75,000
ft2
|
| Annual Production | 3,500
thousand feet
|
| Production Hrs. Annual | 6,257
hrs
|
| Location (State) | Indiana |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $516,684 | 7,381,200 |
kWh
|
$0.070 |
| Electricity Demand | $580,773 | 50,545 |
kW-mo/yr
|
$11.49 |
| Natural Gas | $223,136 | 45,534 |
MMBtu
|
$4.90 |
| TOTAL YEARLY COSTS | $1,320,593 | |||
| RECOMMENDED SAVINGS* | $79,828 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $73,829 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.7231: Use radiant heater for spot heating | $5,999 | $9,168 | - | - | - |
$5,999
-
MMBtu
|
|
| 02 | 2.4133: Use most efficient type of electric motors | $5,310 | $18,709 |
$4,513
64,475
kWh
|
$797
-
kW-mo/yr
|
- | - | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $25,768 | $42,206 |
$14,358
205,111
kWh
|
$11,410
-
kW-mo/yr
|
- | - | |
| 04 | 2.4231: Reduce the pressure of compressed air to the minimum required | $5,829 | $4,500 |
$2,948
42,115
kWh
|
$2,881
-
kW-mo/yr
|
- | - | |
| 05 | 2.8114: Change rate schedules or other changes in utility service | $36,922 | - | - | - | $36,922 | - | |
| TOTAL RECOMMENDED | $79,828 | $74,583 |
$21,819
311,701
kWh
|
$15,088
-
kW-mo/yr
|
$36,922 |
$5,999
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $73,829 | $65,415 |
$21,819
311,701
kWh
|
$15,088
-
kW-mo/yr
|
$36,922 | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs