Assessment Year | 2014 |
---|---|
Principal Product | Rebar |
NAICS | 331222: Steel Wire Drawing |
SIC | 3315: Steel Wiredrawing and Steel Nails and Spikes |
Sales Range | $5 M to 10M |
# of Employees | 40 |
Plant Area |
33,500
ft2
|
Annual Production | 2,000,000
lb
|
Production Hrs. Annual | 1,680
hrs
|
Location (State) | Iowa |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $105,942 | 945,436 |
kWh
|
$0.11 |
Electricity Fees | $2,692 | - |
|
- |
Natural Gas | $11,181 | 2,270 |
MMBtu
|
$4.93 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $5,551 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $5,182 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,605 | $3,229 |
$1,605
14,498
kWh
|
- | |
02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,592 | $197 |
$1,592
14,384
kWh
|
- | |
03 | 2.4221: Install compressor air intakes in coolest locations | $620 | $89 |
$620
5,597
kWh
|
- | |
04 | 2.7135: Install occupancy sensors | $369 | $1,010 |
$369
3,318
kWh
|
- | |
05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $297 | $35 |
$297
2,688
kWh
|
- | |
06 | 2.2211: Use optimum temperature | $660 | $20 | - |
$660
-
MMBtu
|
|
07 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $408 | $110 |
$408
3,696
kWh
|
- | |
TOTAL RECOMMENDED | $5,551 | $4,690 |
$4,891
44,181
kWh
|
$660
-
MMBtu
|
||
TOTAL IMPLEMENTED | $5,182 | $3,680 |
$4,522
40,863
kWh
|
$660
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs