| Assessment Year | 2008 |
|---|---|
| Principal Product | brass and aluminum sand castings |
| NAICS | 331524: Aluminum Foundries (except Die-Casting) |
| SIC | 3365: Aluminum Foundries |
| Sales Range | $5 M to 10M |
| # of Employees | 35 |
| Plant Area |
32,000
ft2
|
| Annual Production | 675,000
lb
|
| Production Hrs. Annual | 2,500
hrs
|
| Location (State) | Minnesota |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $66,274 | 1,424,504 |
kWh
|
$0.047 |
| Electricity Demand | $57,212 | 11,112 |
kW-mo/yr
|
$5.15 |
| Electricity Fees | $16,202 | - |
|
- |
| Natural Gas | $79,293 | 8,086 |
MMBtu
|
$9.81 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $17,168 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $3,417 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.2135: Repair and eliminate steam leaks | $2,458 | $617 |
$1,606
34,473
kWh
|
$852
-
kW-mo/yr
|
- | |
| 02 | 2.7111: Reduce illumination to minimum necessary levels | $443 | $25 |
$288
6,250
kWh
|
$155
-
kW-mo/yr
|
- | |
| 03 | 2.7261: Install timers and/or thermostats | $1,639 | $150 |
$76
1,632
kWh
|
- |
$1,563
-
MMBtu
|
|
| 04 | 2.4133: Use most efficient type of electric motors | $516 | $86 |
$337
7,239
kWh
|
$179
-
kW-mo/yr
|
- | |
| 05 | 2.7135: Install occupancy sensors | $697 | $1,001 |
$697
14,987
kWh
|
- | - | |
| 06 | 2.7232: Replace existing hvac unit with high efficiency model | $11,415 | $18,345 | - | - |
$11,415
-
MMBtu
|
|
| TOTAL RECOMMENDED | $17,168 | $20,224 |
$3,004
64,581
kWh
|
$1,186
-
kW-mo/yr
|
$12,978
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $3,417 | $728 |
$2,231
47,962
kWh
|
$1,186
-
kW-mo/yr
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs