| Assessment Year | 1995 |
|---|---|
| Principal Product | Injection Molded Products |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 85 |
| Plant Area |
60,000
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | New York |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $119,605 | 851,993 |
kWh
|
$0.14 |
| Natural Gas | $15,894 | 1,962 |
MMBtu
|
$8.10 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $3,999 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $3,834 | $11,695 |
$3,834
27,550
kWh
|
|
| 02 | 2.7144: Install spectral reflectors / delamp | $54 | - |
$54
293
kWh
|
|
| 03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $111 | $60 |
$111
879
kWh
|
|
| TOTAL RECOMMENDED | $3,999 | $11,755 |
$3,999
28,722
kWh
|
||
| TOTAL IMPLEMENTED | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs