| Assessment Year | 2020 |
|---|---|
| Principal Product | aviation grade metal tubing |
| NAICS | 336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing |
| SIC | 3728: Aircraft Parts and Auxiliary Equipment, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 71 |
| Plant Area |
50,000
ft2
|
| Annual Production | 72,774
units
|
| Production Hrs. Annual | 4,250
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $101,996 | 940,200 |
kWh
|
$0.11 |
| Electricity Demand | $1,027 | 197 |
kW-mo/yr
|
$5.23 |
| Natural Gas | $8,458 | 610 |
MMBtu
|
$13.87 |
| TOTAL YEARLY COSTS | $111,481 | |||
| RECOMMENDED SAVINGS* | $16,541 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $5,095 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Fees Savings | One-time Revenue or Avoided Cost Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4231: Reduce the pressure of compressed air to the minimum required | $2,436 | $325 |
$2,436
22,522
kWh
|
- | - | |
| 02 | 2.4231: Reduce the pressure of compressed air to the minimum required | $606 | $250 |
$606
5,610
kWh
|
- | - | |
| 03 | 2.8121: Apply for tax-free status for energy purchases | $1,554 | $800 | - | - | $1,554 | |
| 04 | 2.2511: Insulate bare equipment | $1,921 | $2,060 |
$1,921
17,781
kWh
|
- | - | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,659 | $4,515 |
$2,340
21,675
kWh
|
$319 | - | |
| 06 | 2.9114: Use solar heat to make electricty | $7,365 | $52,257 |
$7,365
67,891
kWh
|
- | - | |
| TOTAL RECOMMENDED | $16,541 | $60,207 |
$14,668
135,479
kWh
|
$319 | $1,554 | ||
| TOTAL IMPLEMENTED | $5,095 | $4,840 |
$4,776
44,197
kWh
|
$319 | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Fees Savings | One-time Revenue or Avoided Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs