| Assessment Year | 1990 |
|---|---|
| Principal Product | RUGS AND CARPETS |
| NAICS |
n/a
|
| SIC | 2273: Carpets and Rugs |
| Sales Range | $5 M to 10M |
| # of Employees | 250 |
| Plant Area |
n/a
|
| Annual Production | 12,000
thousand feet
|
| Production Hrs. Annual | 7,200
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $215,744 | 3,820,047 |
kWh
|
$0.056 |
| Natural Gas | $175,753 | 33,205 |
MMBtu
|
$5.29 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $68,850 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $7,300 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | LPG Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.8114: Change rate schedules or other changes in utility service | $42,680 | $90,000 | - |
$50,400
-
MMBtu
|
$(-7,720.0)
-
MMBtu
|
|
| 02 | 2.1233: Analyze flue gas for proper air/fuel ratio | $2,180 | $150 | - |
$2,180
-
MMBtu
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,300 | $2,320 |
$4,300
76,788
kWh
|
- | - | |
| 04 | 2.4133: Use most efficient type of electric motors | $820 | $1,000 |
$820
14,947
kWh
|
- | - | |
| 05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $2,110 | - |
$2,110
37,515
kWh
|
- | - | |
| 06 | 2.4231: Reduce the pressure of compressed air to the minimum required | $2,000 | - |
$2,000
35,756
kWh
|
- | - | |
| 07 | 2.2443: Re-use or recycle hot or cold process exhaust air | $14,760 | $10,000 | - |
$14,760
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $68,850 | $103,470 |
$9,230
165,006
kWh
|
$67,340
-
MMBtu
|
$(-7,720.0)
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $7,300 | $3,470 |
$5,120
91,735
kWh
|
$2,180
-
MMBtu
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | LPG Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs