| Assessment Year | 1986 |
|---|---|
| Principal Product | AUOTOMOTIVE COMPONENTS |
| NAICS |
n/a
|
| SIC | 3714: Motor Vehicle Parts and Accessories |
| Sales Range | $10 M to 50M |
| # of Employees | 490 |
| Plant Area |
n/a
|
| Annual Production | 1,380,000
pieces
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $826,534 | 18,609,027 |
kWh
|
$0.044 |
| Natural Gas | $527,865 | 99,217 |
MMBtu
|
$5.32 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $117,146 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $117,146 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #6 Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $1,616 | $1,866 |
$1,616
36,635
kWh
|
- | - | - | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $5,278 | $218 |
$5,278
118,699
kWh
|
- | - | - | |
| 03 | 2.1233: Analyze flue gas for proper air/fuel ratio | $4,183 | $300 | - | - |
$5,183
-
MMBtu
|
$(-1,000.0) | |
| 04 | 2.1333: Convert combustion equipment to burn oil | $56,269 | - | - |
$159,375
-
MMBtu
|
$(-103,106.0)
-
MMBtu
|
- | |
| 05 | 2.2212: Use minimum safe oven ventilation | $46,250 | $10,000 | - |
$46,250
-
MMBtu
|
- | - | |
| 06 | 2.2443: Re-use or recycle hot or cold process exhaust air | $3,550 | $8,000 | - | - |
$3,550
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $117,146 | $20,384 |
$6,894
155,334
kWh
|
$205,625
-
MMBtu
|
$(-94,373.0)
-
MMBtu
|
$(-1,000.0) | ||
| TOTAL IMPLEMENTED | $117,146 | $20,384 |
$6,894
155,334
kWh
|
$205,625
-
MMBtu
|
$(-94,373.0)
-
MMBtu
|
$(-1,000.0) | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #6 Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs