Assessment Year | 1986 |
---|---|
Principal Product | INFANT/CHILDREN UNDERWR. |
NAICS |
n/a
|
SIC | 2254: Knit Underwear and Nightwear Mills |
Sales Range | $10 M to 50M |
# of Employees | 350 |
Plant Area |
n/a
|
Annual Production | 3,000,000
lb
|
Production Hrs. Annual | 7,200
hrs
|
Location (State) | Georgia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $162,142 | 2,876,905 |
kWh
|
$0.056 |
Natural Gas | $205,930 | 40,222 |
MMBtu
|
$5.12 |
LPG | $945 | 247 |
MMBtu
|
$3.83 |
Fuel Oil #2 | $2,021 | 1,048 |
MMBtu
|
$1.93 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $49,677 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $49,677 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $6,500 | - | - | - | $6,500 | |
02 | 2.2443: Re-use or recycle hot or cold process exhaust air | $18,800 | $15,000 | - |
$18,800
-
MMBtu
|
- | |
03 | 2.7111: Reduce illumination to minimum necessary levels | $260 | $780 |
$260
4,689
kWh
|
- | - | |
04 | 2.2444: Use hot process fluids to preheat incoming process fluids | $15,300 | $22,400 | - |
$15,300
-
MMBtu
|
- | |
05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,750 | $14,700 |
$6,750
123,974
kWh
|
- | - | |
06 | 2.4322: Use or replace with energy efficient substitutes | $517 | $1,993 |
$517
9,379
kWh
|
- | - | |
07 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,550 | $1,920 |
$1,550
27,550
kWh
|
- | - | |
TOTAL RECOMMENDED | $49,677 | $56,793 |
$9,077
165,592
kWh
|
$34,100
-
MMBtu
|
$6,500 | ||
TOTAL IMPLEMENTED | $49,677 | $56,793 |
$9,077
165,592
kWh
|
$34,100
-
MMBtu
|
$6,500 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs