Assessment Year | 2010 |
---|---|
Principal Product | Molded Rubber |
NAICS | 326299: All Other Rubber Product Manufacturing |
SIC | 3069: Fabricated Rubber Products, Not Elsewhere Classified |
Sales Range | $5 M to 10M |
# of Employees | 40 |
Plant Area |
50,000
ft2
|
Annual Production | 4,450,000
pieces
|
Production Hrs. Annual | 4,000
hrs
|
Location (State) | Maryland |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $125,455 | 1,090,486 |
kWh
|
$0.12 |
Natural Gas | $60,953 | 4,822 |
MMBtu
|
$12.64 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $39,602 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $24,082 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.6218: Turn off equipment when not in use | $4,503 | - |
$4,503
40,209
kWh
|
- | |
02 | 2.6218: Turn off equipment when not in use | $2,940 | - |
$2,940
18,200
kWh
|
- | |
03 | 2.2511: Insulate bare equipment | $7,292 | $520 |
$7,292
65,120
kWh
|
- | |
04 | 2.4231: Reduce the pressure of compressed air to the minimum required | $4,168 | $1,500 |
$4,168
37,208
kWh
|
- | |
05 | 2.1233: Analyze flue gas for proper air/fuel ratio | $7,619 | $10,000 | - |
$7,619
-
MMBtu
|
|
06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $12,295 | $23,738 |
$12,295
109,780
kWh
|
- | |
07 | 2.3512: De-energize excess transformer capacity | $785 | $2,410 |
$785
7,012
kWh
|
- | |
TOTAL RECOMMENDED | $39,602 | $38,168 |
$31,983
277,529
kWh
|
$7,619
-
MMBtu
|
||
TOTAL IMPLEMENTED | $24,082 | $35,238 |
$16,463
146,988
kWh
|
$7,619
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs