| Assessment Year | 1999 |
|---|---|
| Principal Product | molds for plastic injection molding |
| NAICS |
n/a
|
| SIC | 3544: Special Dies and Tools, Die Sets, Jigs and Fixtures, and Industrial Molds |
| Sales Range | $1 M to 5M |
| # of Employees | 25 |
| Plant Area |
86,304
ft2
|
| Annual Production | 1,750,000
lb
|
| Production Hrs. Annual | 2,600
hrs
|
| Location (State) | Colorado |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $32,263 | 2,167,351 |
kWh
|
$0.015 |
| Electricity Demand | $72,499 | 6,833 |
kW-mo/yr
|
$10.61 |
| Natural Gas | $19,975 | 4,573 |
MMBtu
|
$4.37 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $18,660 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $5,800 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $11,280 | $60,960 |
$2,630
176,729
kWh
|
$8,650
-
kW-mo/yr
|
- | |
| 02 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $5,800 | $15,000 | - |
$5,800
-
kW-mo/yr
|
- | |
| 03 | 4.214: Purchase appropriately sized material | $1,580 | - | - | - | $1,580 | |
| TOTAL RECOMMENDED | $18,660 | $75,960 |
$2,630
176,729
kWh
|
$14,450
-
kW-mo/yr
|
$1,580 | ||
| TOTAL IMPLEMENTED | $5,800 | $15,000 | - |
$5,800
-
kW-mo/yr
|
- | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs