| Assessment Year | 1996 |
|---|---|
| Principal Product | gypsum wallboard |
| NAICS |
n/a
|
| SIC | 3275: Gypsum Products |
| Sales Range | $10 M to 50M |
| # of Employees | 125 |
| Plant Area |
320,000
ft2
|
| Annual Production | 300,000,000
thousand feet
|
| Production Hrs. Annual | 8,760
hrs
|
| Location (State) | Colorado |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Natural Gas | $2,465,645 | 981,810 |
MMBtu
|
$2.51 |
| LPG | $24,619 | 4,924 |
MMBtu
|
$5.00 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $42,227 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,277 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Natural Gas Savings | LPG Savings | Other Liquid (haz) Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.2414: Use waste heat from hot flue gases to preheat | $26,150 | $81,500 |
$26,150
-
MMBtu
|
- | - | - | |
| 02 | 2.1332: Convert combustion equipment to burn natural gas | $10,940 | $54,750 |
$(-13,680.0)
-
MMBtu
|
$24,620
-
MMBtu
|
- | - | |
| 03 | 2.2511: Insulate bare equipment | $2,940 | $1,900 |
$2,940
-
MMBtu
|
- | - | - | |
| 04 | 2.4133: Use most efficient type of electric motors | $457 | $1,750 |
$457
-
MMBtu
|
- | - | - | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $820 | $660 |
$820
-
MMBtu
|
- | - | - | |
| 06 | 3.8132: Use less toxic and volatile solvent substitutes | $730 | $3,550 | - | - |
$1,560
-
gal
|
$(-830.0) | |
| 07 | 2.7135: Install occupancy sensors | $190 | $420 |
$190
-
MMBtu
|
- | - | - | |
| TOTAL RECOMMENDED | $42,227 | $144,530 |
$16,877
-
MMBtu
|
$24,620
-
MMBtu
|
$1,560
-
gal
|
$(-830.0) | ||
| TOTAL IMPLEMENTED | $1,277 | $2,410 |
$1,277
-
MMBtu
|
- | - | - | ||
| Yearly Savings* | Imp'd Cost* | Natural Gas Savings | LPG Savings | Other Liquid (haz) Savings | Ancillary Material Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs