Assessment Year | 2001 |
---|---|
Principal Product | Electro-Mechanical Devices |
NAICS |
n/a
|
SIC | 3679: Electronic Components, Not Elsewhere Classified |
Sales Range | $5 M to 10M |
# of Employees | 80 |
Plant Area |
60,000
ft2
|
Annual Production | 10,000
units
|
Production Hrs. Annual | 2,080
hrs
|
Location (State) | Illinois |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $16,828 | 370,394 |
kWh
|
$0.045 |
Electricity Demand | $13,389 | 1,132 |
kW-mo/yr
|
$11.83 |
Electricity Fees | $4,785 | - |
|
- |
Natural Gas | $19,145 | 2,378 |
MMBtu
|
$8.05 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $7,439 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $3,554 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.7231: Use radiant heater for spot heating | $3,885 | $3,000 | - | - |
$3,885
-
MMBtu
|
- | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,659 | $5,000 |
$655
14,724
kWh
|
$1,004
-
kW-mo/yr
|
- | - | |
03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,104 | $600 |
$434
9,802
kWh
|
$670
-
kW-mo/yr
|
- | - | |
04 | 2.6212: Turn off equipment during breaks, reduce operating time | $229 | $157 |
$124
2,785
kWh
|
$105
-
kW-mo/yr
|
- | - | |
05 | 2.7135: Install occupancy sensors | $144 | $450 |
$44
978
kWh
|
$100
-
kW-mo/yr
|
- | - | |
06 | 4.821: Pay bills on time to avoid late fees | $418 | - | - | - | - | $418 | |
TOTAL RECOMMENDED | $7,439 | $9,207 |
$1,257
28,289
kWh
|
$1,879
-
kW-mo/yr
|
$3,885
-
MMBtu
|
$418 | ||
TOTAL IMPLEMENTED | $3,554 | $6,207 |
$1,257
28,289
kWh
|
$1,879
-
kW-mo/yr
|
- | $418 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs