| Assessment Year | 1991 |
|---|---|
| Principal Product | PLASTIC INJECTION MOLDS |
| NAICS |
n/a
|
| SIC | 3544: Special Dies and Tools, Die Sets, Jigs and Fixtures, and Industrial Molds |
| Sales Range | n/a |
| # of Employees | 65 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 5,000
hrs
|
| Location (State) | Arizona |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $107,757 | 1,456,331 |
kWh
|
$0.074 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $25,285 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,341 | $1,500 |
$1,341
18,171
kWh
|
- | |
| 02 | 2.6231: Utilize controls to operate equipment only when needed | $1,948 | $1,200 |
$1,948
26,377
kWh
|
- | |
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $526 | $1,000 |
$526
7,034
kWh
|
- | |
| 04 | 2.7123: Keep lamps and reflectors clean | $10,888 | - |
$9,112
123,095
kWh
|
$1,776 | |
| 05 | 2.6232: Install set-back timers | $702 | $525 |
$702
9,379
kWh
|
- | |
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $676 | $274 |
$676
9,086
kWh
|
- | |
| 07 | 2.7422: Plant trees or shrubs near windows to shield from sunlight | $8,006 | $3,100 |
$8,006
108,148
kWh
|
- | |
| 08 | 2.2532: Use only amount of air necessary to prevent explosion hazard | $1,198 | - |
$1,198
16,120
kWh
|
- | |
| TOTAL RECOMMENDED | $25,285 | $7,599 |
$23,509
317,410
kWh
|
$1,776 | ||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs