| Assessment Year | 1990 |
|---|---|
| Principal Product | MOLDED PLASTIC PARTS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 45 |
| Plant Area |
n/a
|
| Annual Production | 400,000
pieces
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | Arizona |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $95,323 | 1,482,122 |
kWh
|
$0.064 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $6,460 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $4,187 | $250 |
$4,187
65,064
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,723 | $310 |
$1,524
23,740
kWh
|
$199 | |
| 03 | 2.4133: Use most efficient type of electric motors | $550 | $729 |
$550
8,499
kWh
|
- | |
| TOTAL RECOMMENDED | $6,460 | $1,289 |
$6,261
97,303
kWh
|
$199 | ||
| TOTAL IMPLEMENTED | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs