Assessment Year | 2000 |
---|---|
Principal Product | Automotive Parts |
NAICS |
n/a
|
SIC | 3714: Motor Vehicle Parts and Accessories |
Sales Range | $100 M to 500M |
# of Employees | 87 |
Plant Area |
45,292
ft2
|
Annual Production | 5,000,000
pieces
|
Production Hrs. Annual | 6,000
hrs
|
Location (State) | Arkansas |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $160,043 | 5,898,886 |
kWh
|
$0.027 |
Electricity Demand | $106,108 | 13,795 |
kW-mo/yr
|
$7.69 |
Natural Gas | $15,348 | 2,936 |
MMBtu
|
$5.23 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $93,572 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $61,862 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $369 | - |
$235
8,792
kWh
|
$134
-
kW-mo/yr
|
- | - | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $759 | $3,641 |
$474
17,585
kWh
|
$285
-
kW-mo/yr
|
- | - | |
03 | 2.4239: Eliminate or reduce compressed air usage | $734 | $2,130 |
$572
21,102
kWh
|
$162
-
kW-mo/yr
|
- | - | |
04 | 2.3212: Optimize plant power factor | $7,860 | $6,250 | - |
$7,860
-
kW-mo/yr
|
- | - | |
05 | 4.631: Install an uninteruptable power supply | $60,000 | $3,000 | - | - |
$60,000
-
lb
|
- | |
06 | 4.513: Re-arrange equipment layout to reduce labor costs | $23,850 | $16,000 | - | - | - | $23,850 | |
TOTAL RECOMMENDED | $93,572 | $31,021 |
$1,281
47,479
kWh
|
$8,441
-
kW-mo/yr
|
$60,000
-
lb
|
$23,850 | ||
TOTAL IMPLEMENTED | $61,862 | $8,771 |
$1,281
47,479
kWh
|
$581
-
kW-mo/yr
|
$60,000
-
lb
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs