| Assessment Year | 2019 |
|---|---|
| Principal Product | Custom plastic parts |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $50 M to 100M |
| # of Employees | 120 |
| Plant Area |
108,000
ft2
|
| Annual Production | 10,000,000
lb
|
| Production Hrs. Annual | 2,580
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $152,377 | 1,587,760 |
kWh
|
$0.096 | |
| Waste Disposal Costs | |||||
| Water Disposal | $18,000 | 12,000 |
Tgal
|
$1.50 | |
| Solid Waste (non-haz) | $14,400 | 24,000 |
lb
|
$0.60 | |
| TOTAL YEARLY COSTS | $184,777 | ||||
| RECOMMENDED SAVINGS* | $20,870 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | $4,220 | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Water Disposal Savings | Solid Waste (non-haz) Savings |
|---|---|---|---|---|---|---|---|
| 01 | 3.6192: Use a less expensive method of waste removal | $13,900 | $4,745 |
$(-3,200.0)
(-32,300)
kWh
|
$17,100
-
Tgal
|
- | |
| 02 | 3.5315: Lease / purchase baler; sell cardboard to recycler | $4,220 | - | - | - |
$4,220
-
lb
|
|
| 03 | 2.4239: Eliminate or reduce compressed air usage | $1,250 | $3,080 |
$1,250
13,000
kWh
|
- | - | |
| 04 | 2.4231: Reduce the pressure of compressed air to the minimum required | $1,050 | $50 |
$1,050
10,900
kWh
|
- | - | |
| 05 | 2.7135: Install occupancy sensors | $370 | $600 |
$370
3,880
kWh
|
- | - | |
| 06 | 2.7124: Make a practice of turning off lights when not needed | $80 | - |
$80
816
kWh
|
- | - | |
| TOTAL RECOMMENDED | $20,870 | $8,475 |
$(-450.0)
(-3,704)
kWh
|
$17,100
-
Tgal
|
$4,220
-
lb
|
||
| TOTAL IMPLEMENTED | $4,220 | - | - | - |
$4,220
-
lb
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Water Disposal Savings | Solid Waste (non-haz) Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs