Assessment Year | 2013 |
---|---|
Principal Product | Wooden utility poles |
NAICS | 321999: All Other Miscellaneous Wood Product Manufacturing |
SIC | 2499: Wood Products, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 70 |
Plant Area |
10,000
ft2
|
Annual Production | 120,000
pieces
|
Production Hrs. Annual | 8,544
hrs
|
Location (State) | Texas |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $212,617 | 2,881,848 |
kWh
|
$0.074 |
Electricity Demand | $78,039 | 9,840 |
kW-mo/yr
|
$7.93 |
Electricity Fees | $(-1,031.0) | - |
|
- |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $20,410 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $20,410 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings |
---|---|---|---|---|---|---|
01 | 2.4231: Reduce the pressure of compressed air to the minimum required | $11,640 | $34 |
$10,170
144,300
kWh
|
$1,470
-
kW-mo/yr
|
|
02 | 2.7124: Make a practice of turning off lights when not needed | $6,475 | - |
$5,620
79,690
kWh
|
$855
-
kW-mo/yr
|
|
03 | 2.4314: Use synthetic lubricant | $805 | - |
$705
10,010
kWh
|
$100
-
kW-mo/yr
|
|
04 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $645 | $240 |
$400
5,640
kWh
|
$245
-
kW-mo/yr
|
|
05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $450 | $25 |
$275
3,940
kWh
|
$175
-
kW-mo/yr
|
|
06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $280 | $600 |
$220
3,100
kWh
|
$60
-
kW-mo/yr
|
|
07 | 2.4239: Eliminate or reduce compressed air usage | $115 | $32 |
$100
1,440
kWh
|
$15
-
kW-mo/yr
|
|
TOTAL RECOMMENDED | $20,410 | $931 |
$17,490
248,120
kWh
|
$2,920
-
kW-mo/yr
|
||
TOTAL IMPLEMENTED | $20,410 | $931 |
$17,490
248,120
kWh
|
$2,920
-
kW-mo/yr
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs