| Assessment Year | 2000 |
|---|---|
| Principal Product | Hot dip galvanizing |
| NAICS |
n/a
|
| SIC | 3479: Coating, Engraving, and Allied Services, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 30 |
| Plant Area |
60,000
ft2
|
| Annual Production | 15,000,000
lb
|
| Production Hrs. Annual | 5,600
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $15,179 | 290,152 |
kWh
|
$0.052 |
| Electricity Demand | $1,894 | 731 |
kW-mo/yr
|
$2.59 |
| Electricity Fees | $579 | - |
|
- |
| Natural Gas | $48,479 | 8,414 |
MMBtu
|
$5.76 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $557,390 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $5,880 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Administrative Changes Savings | Primary Raw Material Savings | Increase in Production Savings |
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | 4.511: Expand operations into unused space | $550,400 | $103,500 | n/a |
$11,700
236,518
kWh
|
- |
$(-6,200.0)
-
MMBtu
|
- | $19,900 | $525,000 |
| 02 | 2.8121: Apply for tax-free status for energy purchases | $5,410 | $2,705 | - | - | - | $5,410 | - | - | |
| 03 | 2.3212: Optimize plant power factor | $1,110 | $1,410 | - |
$1,110
-
kW-mo/yr
|
- | - | - | - | |
| 04 | 2.7124: Make a practice of turning off lights when not needed | $205 | $150 |
$65
2,052
kWh
|
$140
-
kW-mo/yr
|
- | - | - | - | |
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $265 | $200 |
$265
8,206
kWh
|
- | - | - | - | - | |
| TOTAL RECOMMENDED | $557,390 | $107,965 |
$12,030
246,776
kWh
|
$1,250
-
kW-mo/yr
|
$(-6,200.0)
-
MMBtu
|
$5,410 | $19,900 | $525,000 | ||
| TOTAL IMPLEMENTED | $5,880 | $3,055 |
$330
10,258
kWh
|
$140
-
kW-mo/yr
|
- | $5,410 | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs