Assessment Year | 1995 |
---|---|
Principal Product | Carbon and alloy steel, seamless and welded, pipe and tubing |
NAICS |
n/a
|
SIC | 3317: Steel Pipe and Tubes |
Sales Range | $10 M to 50M |
# of Employees | 265 |
Plant Area |
155,000
ft2
|
Annual Production | 37,103
ton
|
Production Hrs. Annual | 3,993
hrs
|
Location (State) | Texas |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $1,448,333 | 32,234,174 |
kWh
|
$0.045 |
Natural Gas | $496,774 | 220,953 |
MMBtu
|
$2.25 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $206,690 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $10,130 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | Solid Waste (haz) Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|---|---|
01 | 2.8114: Change rate schedules or other changes in utility service | $178,800 | - | - | - | - | - | $178,800 | |
02 | 2.2511: Insulate bare equipment | $7,140 | $6,200 | - |
$7,140
-
MMBtu
|
- | - | - | |
03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $420 | $180 |
$420
7,620
kWh
|
- | - | - | - | |
04 | 2.7124: Make a practice of turning off lights when not needed | $360 | $230 |
$360
8,206
kWh
|
- | - | - | - | |
05 | 3.7134: Wash and reuse rags on-site | $10,620 | $15,800 | - | - | - |
$10,620
-
lb
|
- | |
06 | 3.6192: Use a less expensive method of waste removal | $9,350 | - | - | - |
$9,350
-
gal
|
- | - | |
TOTAL RECOMMENDED | $206,690 | $22,410 |
$780
15,826
kWh
|
$7,140
-
MMBtu
|
$9,350
-
gal
|
$10,620
-
lb
|
$178,800 | ||
TOTAL IMPLEMENTED | $10,130 | $410 |
$780
15,826
kWh
|
- |
$9,350
-
gal
|
- | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | Solid Waste (haz) Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs