Assessment Year | 1993 |
---|---|
Principal Product | Machining and welding metal products for oil and natural gas |
NAICS |
n/a
|
SIC | 3351: Rolling, Drawing, and Extruding Of Copper |
Sales Range | $5 M to 10M |
# of Employees | 100 |
Plant Area |
100,100
ft2
|
Annual Production | 1,500,000
lb
|
Production Hrs. Annual | 5,221
hrs
|
Location (State) | Texas |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $91,160 | 1,152,989 |
kWh
|
$0.079 |
Natural Gas | $4,571 | 965 |
MMBtu
|
$4.74 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $28,150 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $19,140 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
---|---|---|---|---|---|
01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $11,300 | $1,500 |
$11,300
230,950
kWh
|
|
02 | 2.4131: Size electric motors for peak operating efficiency | $8,740 | $26,200 |
$8,740
3,517
kWh
|
|
03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $4,540 | $70 |
$4,540
65,944
kWh
|
|
04 | 2.7124: Make a practice of turning off lights when not needed | $2,760 | - |
$2,760
55,393
kWh
|
|
05 | 2.8123: Pay utility bills on time | $540 | - |
$540
-
kWh
|
|
06 | 2.6212: Turn off equipment during breaks, reduce operating time | $150 | - |
$150
2,931
kWh
|
|
07 | 2.6218: Turn off equipment when not in use | $120 | - |
$120
2,345
kWh
|
|
TOTAL RECOMMENDED | $28,150 | $27,770 |
$28,150
361,080
kWh
|
||
TOTAL IMPLEMENTED | $19,140 | $1,570 |
$19,140
352,287
kWh
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs