| Assessment Year | 1992 |
|---|---|
| Principal Product | TEFLON INJECTION MOLDING |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 110 |
| Plant Area |
n/a
|
| Annual Production | 575,000
lb
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $128,175 | 2,459,848 |
kWh
|
$0.052 |
| Natural Gas | $1,316 | 274 |
MMBtu
|
$4.80 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $5,245 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,523 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4322: Use or replace with energy efficient substitutes | $2,580 | $4,050 |
$2,580
101,114
kWh
|
- | |
| 02 | 2.6212: Turn off equipment during breaks, reduce operating time | $1,142 | $80 |
$1,142
46,893
kWh
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $544 | - |
$688
26,964
kWh
|
$(-144.0) | |
| 04 | 2.4133: Use most efficient type of electric motors | $979 | $440 |
$979
19,637
kWh
|
- | |
| TOTAL RECOMMENDED | $5,245 | $4,570 |
$5,389
194,608
kWh
|
$(-144.0) | ||
| TOTAL IMPLEMENTED | $1,523 | $440 |
$1,667
46,601
kWh
|
$(-144.0) | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs