| Assessment Year | 1992 |
|---|---|
| Principal Product | HARDWOOD LUMBER BLANKS |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $1 M to 5M |
| # of Employees | 15 |
| Plant Area |
n/a
|
| Annual Production | 5,500
thousand feet
|
| Production Hrs. Annual | 3,460
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $49,774 | 604,924 |
kWh
|
$0.082 |
| Natural Gas | $39,255 | 8,036 |
MMBtu
|
$4.88 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $7,392 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 3.6192: Use a less expensive method of waste removal | $4,500 | $19,165 |
$4,500
48,359
kWh
|
|
| 02 | 2.4312: Improve lubrication practices | $730 | - |
$730
8,499
kWh
|
|
| 03 | 2.6212: Turn off equipment during breaks, reduce operating time | $990 | - |
$990
18,757
kWh
|
|
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $400 | $150 |
$400
7,620
kWh
|
|
| 05 | 2.4133: Use most efficient type of electric motors | $642 | $477 |
$642
7,327
kWh
|
|
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $130 | $200 |
$130
1,758
kWh
|
|
| TOTAL RECOMMENDED | $7,392 | $19,992 |
$7,392
92,320
kWh
|
||
| TOTAL IMPLEMENTED | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs