Assessment Year | 1986 |
---|---|
Principal Product | SURGICAL SUPPLIES |
NAICS |
n/a
|
SIC | 3842: Orthopedic, Prosthetic, and Surgical Appliances and Supplies |
Sales Range | $10 M to 50M |
# of Employees | 220 |
Plant Area |
n/a
|
Annual Production | 250,000
pieces
|
Production Hrs. Annual | 2,000
hrs
|
Location (State) | North Carolina |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $12,839 | 203,986 |
kWh
|
$0.063 |
Natural Gas | $11,032 | 1,785 |
MMBtu
|
$6.18 |
Fuel Oil #2 | $16,782 | 2,450 |
MMBtu
|
$6.85 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $3,947 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $2,244 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #2 Savings |
---|---|---|---|---|---|---|---|
01 | 2.6214: Shut off pilots in standby equipment | $1,555 | - | - |
$1,555
-
MMBtu
|
- | |
02 | 2.2136: Install / repair insulation on steam lines | $944 | $287 | - | - |
$944
-
MMBtu
|
|
03 | 2.2163: Use minimum steam operating pressure | $645 | - |
$55
879
kWh
|
- |
$590
-
MMBtu
|
|
04 | 2.2122: Install / repair insulation on condensate lines | $267 | $100 | - | - |
$267
-
MMBtu
|
|
05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $203 | $210 |
$203
3,224
kWh
|
- | - | |
06 | 2.6212: Turn off equipment during breaks, reduce operating time | $185 | $170 |
$185
2,931
kWh
|
- | - | |
07 | 2.4231: Reduce the pressure of compressed air to the minimum required | $148 | - |
$148
2,345
kWh
|
- | - | |
TOTAL RECOMMENDED | $3,947 | $767 |
$591
9,379
kWh
|
$1,555
-
MMBtu
|
$1,801
-
MMBtu
|
||
TOTAL IMPLEMENTED | $2,244 | $767 |
$443
7,034
kWh
|
- |
$1,801
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Fuel Oil #2 Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs