| Assessment Year | 1994 |
|---|---|
| Principal Product | Plastic Molded Parts |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 16 |
| Plant Area |
13,000
ft2
|
| Annual Production | 225,000
lb
|
| Production Hrs. Annual | 2,168
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $41,224 | 309,203 |
kWh
|
$0.13 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $11,213 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $3,471 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $638 | $940 |
$638
4,689
kWh
|
|
| 02 | 2.4231: Reduce the pressure of compressed air to the minimum required | $220 | $45 |
$220
1,758
kWh
|
|
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $299 | $200 |
$299
2,345
kWh
|
|
| 04 | 2.2511: Insulate bare equipment | $7,742 | $1,684 |
$7,742
56,858
kWh
|
|
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,397 | $1,089 |
$1,397
12,309
kWh
|
|
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $917 | $1,435 |
$917
7,327
kWh
|
|
| TOTAL RECOMMENDED | $11,213 | $5,393 |
$11,213
85,286
kWh
|
||
| TOTAL IMPLEMENTED | $3,471 | $3,709 |
$3,471
28,428
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs