| Assessment Year | 1995 |
|---|---|
| Principal Product | Molded Automotive Plastic Parts |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 240 |
| Plant Area |
50,000
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Mississippi |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $315,904 | 6,044,256 |
kWh
|
$0.052 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $80,982 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $2,419 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.2628: Utilize a less expensive cooling method | $38,516 | $124,340 |
$38,516
701,934
kWh
|
|
| 02 | 2.2511: Insulate bare equipment | $5,499 | $9,280 |
$5,499
136,870
kWh
|
|
| 03 | 2.7241: Install outside air damper / economizer on hvac unit | $30,539 | $35,000 |
$30,539
759,672
kWh
|
|
| 04 | 2.4133: Use most efficient type of electric motors | $2,419 | $15,700 |
$2,419
36,049
kWh
|
|
| 05 | 2.7227: Use water on air conditioning exchanger to improve heat transfer and increase air conditioner efficiency | $4,009 | $3,000 |
$4,009
75,029
kWh
|
|
| TOTAL RECOMMENDED | $80,982 | $187,320 |
$80,982
1,709,554
kWh
|
||
| TOTAL IMPLEMENTED | $2,419 | $15,700 |
$2,419
36,049
kWh
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs