Assessment Year | 1994 |
---|---|
Principal Product | School forms |
NAICS |
n/a
|
SIC | 2782: Blankbooks, Looseleaf Binders and Devices |
Sales Range | $10 M to 50M |
# of Employees | 145 |
Plant Area |
83,678
ft2
|
Annual Production | 400,000
lb
|
Production Hrs. Annual | 2,600
hrs
|
Location (State) | Kansas |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $87,953 | 1,764,654 |
kWh
|
$0.050 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $38,727 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $453 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $24,083 | $25,905 |
$32,405
650,059
kWh
|
$(-8,322.0)
-
MMBtu
|
- | |
02 | 2.9112: Use solar heat to heat water | $380 | $400 |
$380
7,620
kWh
|
- | - | |
03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $321 | $334 |
$321
6,448
kWh
|
- | - | |
04 | 2.4133: Use most efficient type of electric motors | $292 | $1,088 |
$292
5,862
kWh
|
- | - | |
05 | 2.6218: Turn off equipment when not in use | $161 | - |
$161
3,224
kWh
|
- | - | |
06 | 2.7145: Install skylights | $5,873 | $14,300 |
$5,873
117,819
kWh
|
- | - | |
07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $5,683 | $20,936 |
$5,683
114,009
kWh
|
- | - | |
08 | 2.7135: Install occupancy sensors | $1,505 | $700 |
$1,505
30,188
kWh
|
- | - | |
09 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $429 | $544 |
$161
3,224
kWh
|
- | $268 | |
TOTAL RECOMMENDED | $38,727 | $64,207 |
$46,781
938,453
kWh
|
$(-8,322.0)
-
MMBtu
|
$268 | ||
TOTAL IMPLEMENTED | $453 | $1,088 |
$453
9,086
kWh
|
- | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs